-
Sign Up! To view all forums and unlock additional cool features
Welcome to the #1 Explorer ST Forum and Explorer ST community dedicated to Explorer ST owners and enthusiasts. Register for an account, it's free and it's easy, so don't hesitate to join the Explorer ST Forum today!
What Have You Done To Your Explorer ST Today
- Thread starter TNSmokee
- Start date
thank you
my wife the number one critic agrees, she is very happy with them
it was funny, i was looking around for some and she came home from shopping and asked if they had running boards like in our f150
i said yes i found an auto set and some fixed sets
she is vertically challenged (5.0 feet) and asked if a fixed set would look ok???
soooo i showed her as many pics as i could find with these installed
she liked, i bought and put them on. overall it took in real time about 50 minutes.
if you dont count the HIGH PRESSURE water hose squirting all the sand out of the nooks and stuff, so it would stop falling in my eyes
my wife the number one critic agrees, she is very happy with them
it was funny, i was looking around for some and she came home from shopping and asked if they had running boards like in our f150
i said yes i found an auto set and some fixed sets
she is vertically challenged (5.0 feet) and asked if a fixed set would look ok???
soooo i showed her as many pics as i could find with these installed
she liked, i bought and put them on. overall it took in real time about 50 minutes.
if you dont count the HIGH PRESSURE water hose squirting all the sand out of the nooks and stuff, so it would stop falling in my eyes
-
1
- Show All
I tossed on the aFe Bladerunner Hot/Cold pipes the other day (read my grumble elsewhere), so with the I.C. and AEM drop-in dry filter, I'm ready for a tune.
I tossed my stock tune on ZFG's TDN a while ago, now I chomp at the bit waiting for my DMS...
I tossed my stock tune on ZFG's TDN a while ago, now I chomp at the bit waiting for my DMS...
Going for the 93 DMS?
-
1
- Show All
Just got through flashing a 4th revision of a ZFG tune that enabled me to take advantage of the CRP Stage 5 turbos and CVF DPs.
Took it out to log a couple of pulls, hit 2nd gear and blew the hot side pipe right off the turbo. :-O
I'll have to clamp that down adequately tomorrow. The installer must've gone a little light on that one.
.
.
.
.
Took it out to log a couple of pulls, hit 2nd gear and blew the hot side pipe right off the turbo. :-O
I'll have to clamp that down adequately tomorrow. The installer must've gone a little light on that one.
.
.
.
.
Attachments
Last edited:
-
2
-
1
- Show All
Put hood strut kit on
Instructions shoukd have said remove under hood blanket then pop it back on after pins are put in. Made getting the nut plates on easier
I also put some rubber sticky membrane on the nut plates and studs in the hood
To help them stay tight, not cause corrosion etc
And post office delivered it this afternoon...yes sunday
Instructions shoukd have said remove under hood blanket then pop it back on after pins are put in. Made getting the nut plates on easier
I also put some rubber sticky membrane on the nut plates and studs in the hood
To help them stay tight, not cause corrosion etc
And post office delivered it this afternoon...yes sunday
Attachments
Last edited:
-
5
- Show All
Put on the weather tech window visors
Easiest mod so far
Left out tye Pic
But on passenger side the trim panel is cracked..I now know where the rock hit tye other day. Lucky it missed window
But what is it called and maybe part number
I see dealer Tuesday for truck oil change. Might order it there
Easiest mod so far
Left out tye Pic
But on passenger side the trim panel is cracked..I now know where the rock hit tye other day. Lucky it missed window
But what is it called and maybe part number
I see dealer Tuesday for truck oil change. Might order it there
Attachments
Last edited:
-
1
- Show All
Well it’s been exactly 1 week since I came home with my 2020.
So far swapped out the rear bulbs with the HSF kit, and got tint installed yesterday. 15 on fronts, 20 all the way around the rear, and 50 on windshield. Got my forscan obdlink coming tomorrow to mess around with some programming.
Updated my Sync3 to the latest 23188 as well, that was probably the biggest pain out of everything.
I’m having a pretty loud squeaking coming from what appears to be the sunroof shade cover (it goes away when cover is all the way back or if sunroof is vented) - any ideas from anyone? Is this a common thing?
Sent from my iPad using Tapatalk
So far swapped out the rear bulbs with the HSF kit, and got tint installed yesterday. 15 on fronts, 20 all the way around the rear, and 50 on windshield. Got my forscan obdlink coming tomorrow to mess around with some programming.
Updated my Sync3 to the latest 23188 as well, that was probably the biggest pain out of everything.
I’m having a pretty loud squeaking coming from what appears to be the sunroof shade cover (it goes away when cover is all the way back or if sunroof is vented) - any ideas from anyone? Is this a common thing?
Sent from my iPad using Tapatalk
-
3
- Show All
Today I added a blacked out American Flag Hitch Cover, A red Push Start button overlay, and Running boards! Previously I added molded floor Protectors and new Red accented Cup holder and cubby hole/ compartment rubber mats. A Blacked out American flag License plate frame as well.
Planned upgrades to include
Thermal R&D exhaust.
Intercooler
Cold air intake
Catch can
and ECU Cover.
Black Rims.
as my car did not have the High Package I didn't get the 21" wheels and red calipers!
Planned upgrades to include
Thermal R&D exhaust.
Intercooler
Cold air intake
Catch can
and ECU Cover.
Black Rims.
as my car did not have the High Package I didn't get the 21" wheels and red calipers!
Explorer ST Posts
-
-
-
-
-
-
-
-
-
Considering 2025 ST but concerned with reliability
- Latest: poordudedrivingaford