Wide Body Kit interest?

[Nbk4t5e]

Did some measuring today. The only way ANY spacer is fitting IN ADDITION TO a 10.5+30 wheel is with 305/35r22 tires (a +35 wheel will give you a little more room to play with spacer width). There is a metal backing plate on the rear side (by the door) of the font fender lining that my 305/40r22s almost touch and will prevent any trimming from being done. Any more offset and they WILL touch. so I and others like me are out of the game unless going to a smaller tire size. assuming 1" bigger diameter than stock, that 1/2" in additional radius gives you a little room to play with.

I would definitely be curious what that gap looks like on others with 305s on +30s. For those with stock 21", keep this in mind. the difference in "poke" is only about 1" between you and me, but i was able to run a 1.25" spacer on my 21" without touching the fender lining due to the smaller tire diameter. so a stock street pack 21" with 1.25" spacer can actually sit FURTHER outboard than my custom forged setup due to my tire size. which ALSO means, if I size down to 305/35r22s on my current wheels, I could throw in at least a 0.25" spacer to get some more poke. this ALSO means, that someone who hasn't built wheels yet, could possibly order 22x10.5+25s

if these overfenders can actually make the wheel well opening smaller so there is less gap between the tire and the body, then moving to 305/35s would actually be a good move without sacrificing looks. @Waido can you comment on if this kit reduces the overall opening size of the fender at all, reducing tire/body gap?

View attachment 9050

There won’t be any reduction in the gap area.


Sent from my iPhone using Tapatalk

 

[Nbk4t5e]

Do you have a straight-on side view? Can you add a red one similar to Rapid Red to the mix?

Not rapid red but you get the picture and the new design. Brought the kit down some and added the vent on the front. Super clean look

Sent from my iPhone using Tapatalk

 

[Nbk4t5e]

Newest renders . I think this nails it

Sent from my iPhone using Tapatalk

 

[Cmaximst]

No thank you

 

[Nbk4t5e]

Last rendering is coming today .. no vents


Sent from my iPhone using Tapatalk

 

[BAD430BENZ]

Was a price ever discussed ? I know you can't give exact pricing but a ballpark would help with a lot of decision making among members .

 

[Rick]

Was a price ever discussed ? I know you can't give exact pricing but a ballpark would help with a lot of decision making among members .

read the first post in this thread .

 

[Nbk4t5e]

This is the last rendering .. classic clean look following the lines of the current body.

Sent from my iPhone using Tapatalk

 

[Nbk4t5e]

Was a price ever discussed ? I know you can't give exact pricing but a ballpark would help with a lot of decision making among members .

Roughy 2k the mold needs to be made so we need at least 3 to 4 ppl to be interested with half down before moving forward


Sent from my iPhone using Tapatalk

 

[Nbk4t5e]

Sent from my iPhone using Tapatalk

 

[BAD430BENZ]

read the first post in this thread .

Roughy 2k the mold needs to be made so we need at least 3 to 4 ppl to be interested with half down before moving forward


Sent from my iPhone using Tapatalk

Well I'm just freakin' blind.....lol

 

[Nbk4t5e]

We would like to get a serious headcount on this. Please let me know and message me or @Waido on this


Sent from my iPhone using Tapatalk

 

[Nbk4t5e]

Sent from my iPhone using Tapatalk

 

[66gt350ps]

Not fo me. Looks cool but it will definitely attract parking lot pillar scrapes based on my history.

 

[Thep3yton]

Just signed up as number two. I believe waido is going to send a rendering in silver! Can’t wait.

 

[Nbk4t5e]

Just signed up as number two. I believe waido is going to send a rendering in silver! Can’t wait.

We are working on a little change as well. I’m going to open another thread once renders are finalized and we can get a count.

Working with ppl here / Facebook / IG and ticktok. Just trying to get everyone satisfied with the look.


Sent from my iPhone using Tapatalk

 

[Thep3yton]

Pe

We are working on a little change as well. I’m going to open another thread once renders are finalized and we can get a count.

Working with ppl here / Facebook / IG and ticktok. Just trying to get everyone satisfied with the look.


Sent from my iPhone using Tapatalk

We are working on a little change as well. I’m going to open another thread once renders are finalized and we can get a count.

Working with ppl here / Facebook / IG and ticktok. Just trying to get everyone satisfied with the look.


Sent from my iPhone using Tapatalk

personally I was a big fan of the rendering with the vent, added a little bit of contrast making it look less round and went more with the sharp edges of the st

 

[Nbk4t5e]

Pe


personally I was a big fan of the rendering with the vent, added a little bit of contrast making it look less round and went more with the sharp edges of the st

We were back-and-forth on the vents the only problem I see is sometimes they can look a little fake in person


Sent from my iPhone using Tapatalk

 

[BAD430BENZ]

We were back-and-forth on the vents the only problem I see is sometimes they can look a little fake in person


Sent from my iPhone using Tapatalk

Depends on the style of the vent .

IMHO , the fender vents are what makes a widebody look widebody .

 

[Nbk4t5e]

Depends on the style of the vent .

IMHO , the fender vents are what makes a widebody look widebody .

Definitely depends


Sent from my iPhone using Tapatalk