Mine is running well. I sent him datalogs the other night, but I screwed up and when I closed the scanner I forgot to reload the definitions file so when I did my couple of pulls to send him it was just with the generic datalog file, so I need to redo my pulls today and resend them to him... Supposed to be 101 degrees today... guess it dont matter though.
-
Sign Up! To view all forums and unlock additional cool features
Welcome to the #1 Explorer ST Forum and Explorer ST community dedicated to Explorer ST owners and enthusiasts. Register for an account, it's free and it's easy, so don't hesitate to join the Explorer ST Forum today!
ZFG: I guess I'm a fanboy now too
- Thread starter blaster9
- Start date
Just got the email yesterday from Adam. Going to put my order in a new send stock file today. Switching from pbd even though I haven’t had any bad experiences I can’t pass this up with all the good things everyone says. Question though should I flash back to stock first or just flash right to adams file from my current tune ?
Thread Starter
#44
Hate to hijack my own thread but after 8 fun months with you guys, i’m heading back to turtle land with a 3-row Jeep GCL lol. My 1-bolt rear end (courtesy of Ford’s 2021 ingenuity lol) imploded for the second time in less than a month and almost left me stranded in the blue ridge mountains.
Long story short, Im unloading my holy grail HPTuners RTD wZFG (I flashed back to stock before sale so not sure if ZFG would be willing/able to support another VIN with the same serial # RTD device) + like new Dragy (bought this month & used 1 time) + FORScan OBD-2 adapter. PM me any reasonable offers and ill post up in the for sale section when i get a minute.
It’s been fun guys! Thx for all the insight and help along the way. I tried to share my experiences and advice whenever possible. Cya in the slow lane haha
Long story short, Im unloading my holy grail HPTuners RTD wZFG (I flashed back to stock before sale so not sure if ZFG would be willing/able to support another VIN with the same serial # RTD device) + like new Dragy (bought this month & used 1 time) + FORScan OBD-2 adapter. PM me any reasonable offers and ill post up in the for sale section when i get a minute.
It’s been fun guys! Thx for all the insight and help along the way. I tried to share my experiences and advice whenever possible. Cya in the slow lane haha
Last edited:
I ordered mine last Friday and it's being shipped out too 
. As I have Livernois right now I plan to flash back to stock so that I can grab the stock calibration like he requests. I'd highly suggest going back to stock first.
. As I have Livernois right now I plan to flash back to stock so that I can grab the stock calibration like he requests. I'd highly suggest going back to stock first.
Sorry to hear this. Also sorry that your Ford dealer couldn't get you sorted. My rear end has two bolts and its so freaking odd they couldn't figure that out for you.
Adding VIN #s is easy peasy to RTD devices. I've shared RTDs with friends in the past when we were all being cheapskates about it (different tunes and even different tuners on the same device). Its just a piece of interface hardware. All that matters is that your account (S/N#) has the appropriate credits. RTD and MPIV2 devices go for about retail on the second hand market. They can theoretically hold up to about 1000 VINs. So feel free to sell your RTD with a clear conscience for basically what you paid for it.
Adding VIN #s is easy peasy to RTD devices. I've shared RTDs with friends in the past when we were all being cheapskates about it (different tunes and even different tuners on the same device). Its just a piece of interface hardware. All that matters is that your account (S/N#) has the appropriate credits. RTD and MPIV2 devices go for about retail on the second hand market. They can theoretically hold up to about 1000 VINs. So feel free to sell your RTD with a clear conscience for basically what you paid for it.
Could you elaborate? Looking at your earlier thread, I assumed that the second bolt had simply been missed during construction since the slot was there for it. Looking at the mechanic's statement, it's hard to tell whether a single bolt had snapped or one bolt had snapped on the passenger side. To be clear, after they "fixed" it, it still only had one bolt??
So I ordered my tune and got my RTD flasher from ZFG yesterday. Downloaded the apps on by Surface and nothing works.
I'm following the guide on the website but I can't get the interface to work and I don't even think my tablet is recognizing the RTD via USB.
Does anyone have any ideas?
I emailed Adam but I know he is a one man show and I was hoping to solve some of these issues myself.
I'm following the guide on the website but I can't get the interface to work and I don't even think my tablet is recognizing the RTD via USB.
Does anyone have any ideas?
I emailed Adam but I know he is a one man show and I was hoping to solve some of these issues myself.
Thread Starter
#56
1 bolt from factory, that bolt sheered in half, it was then replaced by Ford, then returned to me with 1 new bolt, the new bolt sheered in half a couple weeks later. Was told by dealer that they contacted higher ups at Ford to triple check that i wasnt missing the 2nd bolt. Ford confirmed only 1 bolt required. I then decided to give up on Ford…
I ordered mine last Friday and it's being shipped out too . As I have Livernois right now I plan to flash back to stock so that I can grab the stock calibration like he requests. I'd highly suggest going back to stock first.
. As I have Livernois right now I plan to flash back to stock so that I can grab the stock calibration like he requests. I'd highly suggest going back to stock first.
Explorer ST Posts
-
-
-
-
-
-
-
-
-
My 2020 ST started knocking 2 days ago on morning cold start.
- Latest: ButchsExplorerST
-
